3B’s Research Group - Biomaterials, Biodegradables and Biomimetics

Tipo: Grupos de investigación universitarios

Acrónimo: 3B's

Nombre del coordinador: Rui L. Reis

Nombre de la institución a la que pertenece: Universidade do Minho

Dirección: 3B's Research Group, I3Bs - Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho

Teléfono: +351 253 510 900

E-mail: Enviar mail

Web: https://3bs.uminho.pt/

LinkedIn: https://www.linkedin.com/company/3b-s-research-group/

Facebook: https://www.facebook.com/3bsResearchGroup

Twitter: https://twitter.com/3bsuminho

Descripción:
The 3B’s Research Group (Biomaterials, Biodegradables and Biomimetics) was established in 1998 at the University of Minho and supports a multidisciplinary and highly skilled team that works at the interface of biotechnology, biology, biomedical engineering and materials science. The major research areas at our group include development of new biomaterials, drug delivery, tissue engineering, regenerative medicine, nanomedicine, in-vitro disease models and stem cell isolation and differentiation.
The group integrates the Portuguese Government Associate Laboratory ICVS/3B´s, a collaboration with the Institute of Health and Life sciences of the School of Medicine of U. Minho. The 3B’s Research Group also leads the European Institute of Excellence on Tissue Engineering and Regenerative Medicine that has branches in 22 locations in 13 different countries.
The goal of the 3B’s Research Group is to develop novel biomaterials (hydrogels, scaffolds, membranes, nano/microparticles) based on natural polymers for applications in drug delivery and tissue engineering of different skeletal and connective tissues. This is accomplished by developing several isolation/purification tools and processing methods, allowing for the fabrication of highly functional natural-derived biomaterials. On the other hand, stem cell research is devoted to the differentiation of mesenchymal stem cells from different sources (adipose tissue, bone marrow, amniotic membrane and fluid, umbilical cord blood, Warton’s Jelly) and origins (human, goat, rat) towards the lineages of interest (e.g. bone, cartilage, skin, tendon) either using conventional methodologies or combining scaffolds with biological signals.
Research at 3B’s is supported by multiple grants from European (The Framework Programmes for research and technological development from the European Union) and National and Regional Funding Agencies, innovation agencies, cross-border programs, as well as by industrial contracts. The 3B’s Research Group has been in the last few years one of the most active groups in Europe on attracting highly competitive and prestigious large grants for research, educational programs, and supporting infrastructure. This strategy has been positioning the Group as a continuously growing and world-respected center on Biomaterials, Tissue Engineering and Regenerative Medicine research.

Áreas de especialización: Mercados, redes comerciales y valorización de productos del mar, Nuevos productos de origen marino, Obtención, gestión y valorización de subproductos marinos

Palabras clave: Biomaterials; Tissue Engineering; Regenerative Medicine Research; wound healing; bone regeneration; cartilage regeneration; by-products valorisation; biomimetics.

Número investigadores: 128

Número doctores: 70

Identificador Scopus: https://www.scopus.com/affil/profile.uri?afid=60020475

Repositorio científico de acceso abierto: http://repositorium.sdum.uminho.pt

Proyectos

Deep-sea Sponge Grounds Ecosystems of the North Atlantic

Acrónimo: SponGES

Programa de financiación: Horizon 2020

Entidad financiadora: European Commission

Año de inicio: 2016

Año de finalización: 2020

Investigador principal: Tiago H. Silva

URL del proyecto: http://www.deepseasponges.org/

Transborder Laboratory of Marine Biotechnology

Acrónimo: BlueBioLab

Programa de financiación: POCTEP

Entidad financiadora: CCDR-N

Año de inicio: 2019

Año de finalización: 2022

Investigador principal: Tiago H. Silva

URL del proyecto: https://www.algavalor.pt/en/

Multifunctional hydrogels inspired by mussels that combine bioactivity with superior adhesion for bone tissue regeneration

Acrónimo: SeaJellyBone

Programa de financiación: Compete2020

Entidad financiadora: Fundação para a Ciência e Tecnologia

Año de inicio: 2018

Año de finalización: 2022

Investigador principal: Rui Costa

URL del proyecto: https://3bs.uminho.pt/research-projects/576

MicroAlgas: produção integrada e valorização da biomassa e das suas diversas aplicações

Acrónimo: Algavalor

Programa de financiación: INTERREG VA Espanha-Portugal

Entidad financiadora: FEDER

Año de inicio: 2019

Año de finalización: 2022

Investigador principal: Tiago H. Silva

URL del proyecto: https://www.algavalor.pt/en/

Valorização Integral dos recursos marinhos: potencial, inovação tecnológica e novas aplicações

Acrónimo: ValorMar

Programa de financiación: European Regional Development Fund (ERDF)

Entidad financiadora: ANI (Agência Nacional de Inovação)

Año de inicio: 2017

Año de finalización: 2021

Investigador principal: Tiago H. Silva

URL del proyecto: http://valormar.pt/

BLUE biotechnology as a road for innovation on HUMAN’s health aiming smart growth in Atlantic Area

Acrónimo: BlueHuman

Programa de financiación: Atlantic Area Transnational Programme

Entidad financiadora: FEDER

Año de inicio: 2018

Año de finalización: 2021

Investigador principal: Tiago H. Silva

URL del proyecto: http://bluehuman.cetmar.org/

Inovação industrial através de colaborações específicas entre empresas e centros de investigação no contexto de valorização biotecnológica marinha

Acrónimo: CVMar+i

Programa de financiación: POCTEP

Entidad financiadora: CCDR-N

Año de inicio: 2017

Año de finalización: 2020

Investigador principal: Tiago H. Silva

URL del proyecto: http://cvmari.cetmar.org/

Platform for the monitoring of the North Atlantic ocean and tools for the sustainable exploitation of the marine resources

Acrónimo: ATLANTIDA

Programa de financiación: Norte2020

Entidad financiadora: CCDR-N

Año de inicio: 2020

Año de finalización: 2023

Investigador principal: Rui L. Reis

URL del proyecto: https://www.atlantidaproject.pt

Shark cartilage as a blue biotechnology model for the development of new biomaterials

Acrónimo: SharTech

Programa de financiación: Compete2020

Entidad financiadora: Fundação para a Ciência e Tecnologia

Año de inicio: 2018

Año de finalización: 2020

Investigador principal: Tiago H. Silva

URL del proyecto: https://3bs.uminho.pt/research-projects/605

Publicaciones

Chitosan/β-TCP composites scaffolds coated with silk fibroin: a bone tissue engineering approach

Autores: Piaia L., Silva S. S., Gomes J. ., Franco AR., Fernandes E. ., Lobo FCM., Rodrigues LC., Leonor I. ., Fredel MC., Salmoria G. ., Hotza D., Reis R. L.

Año de publicación: 2021

Journal: Biomedical Materials

DOI: https://doi.org/10.1088/1748-605X/ac355a

Innovative methodology for marine collagen-chitosan-fucoidan hydrogels production, tailoring rheological properties towards biomedical application

Autores: Carvalho, D. N., Gonçalves, C., Oliveira, J. M., Willliams, D., Mearns Spragg, A., Reis, R. L., and Silva, T. H.

Año de publicación: 2021

Journal: Green Chemistry

DOI: https://doi.org/10.1039/D1GC02223G

Bioactivity of Biosilica Obtained From North Atlantic Deep-Sea Sponges

Autores: Dudik O., Amorim S., Xavier JR., Rapp HT., Silva T. ., Pires R. ., Reis R. L.

Año de publicación: 2021

Journal: Frontiers in Marine Science

DOI: https://doi.org/10.3389/fmars.2021.637810

Fucoidan/chitosan nanoparticles functionalized with anti-ErbB-2 target breast cancer cells and impair tumor growth in vivo

Autores: Oliveira C. ., Gonçalves C. S., Martins E. P., Neves N. M., Reis R. L., Costa B. M., Silva T. ., Martins A.

Año de publicación: 2021

Journal: International Journal of Pharmaceutics

DOI: https://doi.org/10.1016/j.ijpharm.2021.120548

Macro and Microstructural Characteristics of North Atlantic Deep-Sea Sponges as Bioinspired Models for Tissue Engineering Scaffolding

Autores: Martins E., Rapp TH., Xavier JR., Diogo G. ., Reis R. L., Silva T.

Año de publicación: 2021

Journal: Frontiers in Marine Science

DOI: https://doi.org/10.3389/fmars.2020.613647

Marine collagen-chitosan-fucoidan cryogels as cell-laden biocomposites envisaging tissue engineering

Autores: Carvalho DN., López-Cebral R., Sousa RO., Alves AL., Silva S. S., Oliveira J. M., Reys L. ., Reis R. L., Silva T.

Año de publicación: 2020

Journal: Biomedical Materials

DOI: https://doi.org/10.1088/1748-605x/ab9f04

Fucoidan immobilized at the surface of a fibrous mesh presents toxic effects over melanoma cells, but not over non-cancer skin cells

Autores: Oliveira C. ., Soares AI., Neves N. M., Reis R. L., Marques A. ., Tiago S. H., Martins A.

Año de publicación: 2020

Journal: Biomacromolecules

DOI: https://doi.org/10.1021/acs.biomac.0c00482

Cell-Laden Biomimetially Mineralized Shark-Skin-Collagen-Based 3D Printed Hydrogels for the Engineering of Hard Tissues

Autores: Diogo G. ., Marques CF., Sotelo C. ., Pérez-Marin RI., Pirraco R. ., Reis R. L., Silva T.

Año de publicación: 2020

Journal: ACS Biomaterials Science & Engineering

DOI: https://doi.org/10.1021/acsbiomaterials.0c00436

Collagen from Atlantic cod (Gadus morhua) skins extracted using CO2 acidified water with potential application in healthcare

Autores: Sousa RO., Martins E., Carvalho DN., Alves AL., Oliveira C. ., Duarte A. ., Silva T. ., Reis R. L.

Año de publicación: 2020

Journal: Journal of Polymer Research

DOI: https://doi.org/10.1007/s10965-020-02048-x

Extraction and Characterization of Collagen from Elasmobranch Byproducts for Potential Biomaterial Use

Autores: Seixas MJ., Martins E., Reis R. L., Silva T.

Año de publicación: 2020

Journal: Marine Drugs

DOI: https://doi.org/10.3390/md18120617

Patentes

METHOD TO OBTAIN COLLAGEN/GELATIN FROM MARINE SPONGES

Inventores: GONÇALVES DOS REIS RUI LUIS, CRUZ DUARTE ANA RITA, COLARDELLE DA LUZ MANO JOÃO FILIPE, QUINTEIROS LOPES HENRIQUES DA SILVA TIAGO JOSÉ, DE ASCENSÃO AROSO IVO MANUEL, ANTUNES BARROS ALEXANDRE ANTÓNIO, FERNANDES DA SILVA JOÃO CARLOS

Referencia: EP3126382

Año de presentación: 2014

Instituciones titulares: A4TEC

Infraestructura

Offers high quality technical and consulting services in the fields of biomaterials, regenerative medicine and medical devices. Our team combines large expertise and know-how in a broad range of technical and scientific domains, at the interface of materials science and engineering with health sciences and biomedicine, and is able to provide an efficient response according to your specific needs and requirements.

Servicios

MECHANICAL TESTING

Descripción del servicio:
EQUIPMENTS
- Fatigue Equipment
- Universal Mechanical Testing Machine
- Mechanical Spectrometer Apparatus (DMA)
USE APPLICATIONS
- Mechanical testing including static testing and high-frequency dynamic fatigue testing in a tensile, compression and flexural mode
- Measurements of viscoelasticity
- Determination of storage and complex modules
- Module determination depending on temperature, frequency or time

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/materials-characterization/mechanical-t…

THERMAL AND PHYSICAL CHARACTERIZATION

Descripción del servicio:
EQUIPMENTS
- Nano Zetasizer
- Quartz Crystal Microbalance
- Differential Scanning Calorimetry (DSC)
- Contact angle

USE APPLICATIONS
- Determination of specific heat capacity of polymers
- Determination of glass-transition and melt temperatures of polymers
- Investigations of crystallization kinetics of polymers
- Determination of surface free energy of solid samples
- Wetting behaviour study
- Printability evaluation
- Determination of size and zeta potential of nano particles

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/materials-characterization/thermal-and-…

CHEMICAL CHARACTERIZATION

Descripción del servicio:
EQUIPMENTS
- Analytical High Performance Liquid Chromatography (HPLC)
- Gel Permeation Chromatography (GPC)
- Fourier Transform Infrared Spectrometer (FTIR)
- Inductively Coupled Plasma Spectrometer (ICP)
- Standard UV-VIS Photospectrometer

USE APPLICATIONS
- Qualitative and quantitative detection of single components
- Multielement analysis - qualitative and quantitative determination of ions in solution
- Characterization of polymers
- Identification of polymers and low-molecular substances (e.g. impurities and additives)
- Determination of the chemical composition (functional groups)
- Characterization of surfaces

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/materials-characterization/chemical-cha…

MORPHOLOGICAL CHARACTERIZATION

Descripción del servicio:
EQUIPMENTS
- X-Ray Micro-Computed Tomographer (m-CT)
- Spectroscopic Ellipsometer
- SEM Scanning Electron Microscopy

USE APPLICATIONS
- Non-destructive analysis and quantification of porosity, pore size and interconnectivity of porous structures
- Analysis, quantification and 3D reconstruction of mineralized tissue
- Analysis and 3D reconstruction of the bulk structure of samples
- Non-destructive analysis and reconstruction of a reinforcement on a polymeric matrix.

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/materials-characterization/morphologica…

HISTOLOGY

Descripción del servicio:
EQUIPMENTS
- Cryo-sectioning equipment (Cryostat)
- Automatic Spin Processor
- Paraffin Embedding Centre
- Microtome
- Automatic Staining Equipment
- Transmitted and Reflected Light Microscope

USE APPLICATIONS
- Sectioning, staining and permanent mounting of cryo-preserved in vitro and in vivo samples
- Sectioning, staining and permanent mounting of chemically preserved in vitro and in vivo samples
- Microscopic analysis of all obtained samples

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/biological-characterization/histology

IN VIVO EVALUATION

Descripción del servicio:
FACILITIES/EQUIPMENTS
- Fully equipped facilities for rodents and lagomorphs
- Surgical facilities for immunocompetent and immunocompromised animals

USE APPLICATIONS
- Biocompatibility tests on rodents (mice, including immunocompromised, and rats) and rabbits
- Evaluation of bone and cartilage regeneration of biomaterials and/or tissue engineering constructs in rat and rabbit models

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/biological-characterization/In-vivo-Eva…

CYTOTOXICITY TESTS - IN VITRO

Descripción del servicio:
FACILITIES/EQUIPMENTS
- Animal Cell Culture Specific Laboratory
- Thermostatic Water Baths
- Microplate Reader for Absorbance, Fluorescence and Luminescence
- Biohazard Vertical Flow Chambers
- CO2 Incubators for Cell Culture Conditions
- Inverted Microscope

USE APPLICATIONS
- Evaluation of the effects of leachables released from polymeric materials on cell behaviour (growth, membrane damage, metabolism, etc), according to the established international standards on cytotoxicity evaluation of leachables from medical devices/materials
- Direct contact assays - cell-biomaterials surface interactions

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/biological-characterization/cytotoxicit…

CELL CHARACTERIZATION TESTS

Descripción del servicio:
EQUIPMENTS
- Cell Culture Specific Laboratory
- Biohazard Vertical Flow Chambers
- CO2 Incubators for Cell Culture Conditions
- Histology Laboratory
- Inverted Microscope
- Transmitted and Reflected Light Microscope
- Flow Cytometer
- Molecular biology equipment (real time thermocyclers)

USE APPLICATIONS
- Qualitative and quantitative evaluation of primary cell markers by immunocytochemistry and by flow cytometry
- Characterization of specific genetic markers expression after primary cell culture
- Qualitative evaluation of cell differentiation profile after culturing with medical devices/materials by immunocytochemistry
- Quantitative assessment of specific differentiation markers by flow cytometry

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/biological-characterization/cell-charac…

POLYMERS PROCESSING

Descripción del servicio:
EQUIPMENTS
- Injection moulding
- Compression moulding
- Extrusion
- Rapid prototyping
- Freeze-drying
- Supercritical fluids

AVAILABLE APPLICATIONS
- Processing of polymers and composites
- Development of materials for specific applications

Tipo de servicio: Tecnologías/Plataformas Tecnológicas

URL servicio: https://services.3bs.uminho.pt/services/polymers-processing